Phone : +86-371-5512-9198
E-mail: leizhanchina@gmail.com
You are here: Home » Solutions » Kraft Paper Making Line » Cylinder mould paper machine

Cylinder mould paper machine

Cylinder mould paper machine

In Tradition, paper production on a cylinder mould paper machine start in the vat housing a mould, that is a stainless steel box in which a cylinder mould up to 285 cm in circumference and 150 cm in width is placed. The size of the cylinder is the chief factor in determining the size of the mould-made paper produced.

A highly diluted mixture of pulp and water is fed into the vat with combined uniflow and contraflow forming a fibrous web on the cylinder mould. The sheet is transferred to the wet end of the machine with a suction roll located at the highest point of the cylinder mould.

Not only does the cylinder mould produce genuine watermarks, the paper sheet can also be divided into smaller sheets. For this purpose, special bands and metal dividers are attached to the surface of the cylinder mould with copper wire to mark the size of individual sheets. Thus also the mould-made paper produced on a machine can have four ragged edges characteristic of hand-made paper. Some paper fibres gather on the attached deckle frames. As the speed of the machine can be controlled, after the press section, the still wet paper can be torn along the marked, weaker lines. Only a sheet edge thus obtained can be treated as a deckle edge characteristic of mould-made paper. The cylinder mould paper machine is not only used to make paper sheets, but also to produce paper rolls, i.e. endless paper web.

The double wet press section consists of a pair of hydraulically loaded rolls connected with a parallel drive and a common top and bottow felt. To improve water extraction, the paper web is then gently heated with an infra-red dryer and introduced to the dryer section which consists of a series of steamheated cylinders. Thanks to special felt material used in the first dryer group, paper does not come into direct contact with the cylinder surface and thus maintains good surface uniformaty on both sides.

Leizhan supply Cylinder mould for paper making industries, also press roll, dryer cylinder, doctor holder, stretcher, felt leading roll, gear, felt and other paper machine spare parts we supplied for paper production line.

Welcome

Zhengzhou Leizhan Technology Paper Machinery Co., LTD., founded in the year 1980, is a professional manufacturer in researching and developing complete sets of waste paper pulp equipment. Our waste paper recycling plants and pulp equipment are highly praised by customers in paper making industries around the world.

Leizhan paper pulp machine are mainly about pressure screen( M.C. pressure screen, Inflow pressure screen ), Drum Pulper VS D type Hydrapulper, Bale Opener, waste paper Chain Conveyor, Pulp Pump, Vertical Hydrapulper, Light Impurity Separator, Auto-cleaning Vibrating Screen, Reject Separator, refiner equipment, etc.

Leizhan Products

Contact Us
Zhengzhou Leizhan Technology
Paper Machinery Co., LTD.

E-mail: leizhanchina@gmail.com
Tel : +86-371-5512-9198
WhatsApp: +86-13783579051